Inhaler Delivery Device

Babel_InhalerDeliveryDevice

SUMMARY

This is an emergency use item only. An Inhaler delivery device which can be used with most standard Inhaler cartridges. It is not possible to give an absolute measurement on dispersal rate, although it appears to deliver a significant amount. There are two file options consisting of a long and short case version. The only difference is that the short version allows for faster printing time as well as less material requirement, should that be of a concern.

Download Size 2.8 MB

PRINT SETTINGS

QUALIFICATION

Material:
Print time:
Resolution:

PLA

1h 39m

0.2 mm

Tested by 3D Crowd

TESTING METHOD

Nozzle size:
Rafts:
Supports:
Infill:
Print Size:

0.4 mm

No

No

30%

Print suitability tested and functionally tested.

TESTING NOTES

Material used:

11g

Self tested using Ventolin inhaler cartridge. PETG preferred for sterilisation.

Printer test:

CEL RoboxDuel

PRINT NOTES

ADDITIONAL COMMENTS

No stringing detected on tested settings. Item printed as expected with no problems to report.

What files or other parts do I need to print this?

Babel_InhalerDeliveryDeviceShort.stl ; Babel_InhalerDeliveryDeviceLong.stl ; Babel_InhalerDeliveryDeviceShort_0.2mm_CEL_ROBOXDUAL_1h39m.gcode ; Babel_InhalerDeliveryDeviceLong_0.2mm_CEL_ROBOXDUAL_2h22m.gcode

Assembly instructions

Simply insert inhaler cartridge

Original Credit:

This Version:

Andrew Belding - 3D Crowd - 07 December 2020

Licence:

Creative Commons (4.0 International License)
Attribution-NonCommercial