IV Giving Set
Babel_IVgiving
SUMMARY
This is an emergency use item only. An IV Giving Set to help control the flow to any IV. It can be installed with an already fitted IV. This should be suitable for most tubing with a maximum outer diameter range of approximately 7mm. It should be stressed that this is not an approved medical device and should only be used in an emergency situation as a last resort. Please always seek professional medically certified equipment, and advice, when ever possible.
Download Size 3.0 MB
PRINT SETTINGS
QUALIFICATION
Material:
Print time:
Resolution:
PLA
1hr 54m
0.2mm
Under Test
TESTING METHOD
Nozzle size:
Rafts:
Supports:
Infill:
Print Size:
0.4 mm
No
No
30%
Under Test
TESTING NOTES
Material used:
15 g
Under Test
Printer test:
CEL RoboxDuel
PRINT NOTES
ADDITIONAL COMMENTS
No Support required.
No stringing detected on tested settings. Item printed as expected with no problems to report.
What files or other parts do I need to print this?
Babel_IVGivingSetComplete.stl
Assembly instructions
Connect Part A and B together. See images.
Original Credit:
This Version:
Andrew Belding - 3D Crowd - 07 December 2020
Licence:
Creative Commons (4.0 International License)
Attribution-NonCommercial