Oxygen splitter designed to convert a single oxygen supply line into two lines. Suitable for use when oxygen supply infrastructure is inadequate in healthcare environments. Sized for 4mm ID PVC tube, but can be scaled according to individual needs.
Download Size 2.4 MB
15m - 30m
0.15mm - 0.28mm
Tested by 3D Crowd
Brim if necessary for vertical printing adhesion.
55 x 21 x 5
Print suitability tested only with basic application check using diving oxygen cylinder and flow meters. Not medically certified.
Tested by 3DCrowd
Tested on multiple different machines.
Can be printed vertical or horizontal depending on what your printer can achieve. Horizontal prints may create a flat side of the tube, but these are still acceptable.
What files or other parts do I need to print this?
Babel_02D2.stl ; Babel_O2D2ClampRing.stl ; Babel_O2D2Case.stl ; Babel_O2D2ClampRingCase.stl
Push fit oxygen hoses to O2D2 ports. The single port should be connected to oxygen cylinder side. There is a clamp ring to print if there are problems adequately securing the hose, this is push fit over each port to wedge the pipe. If additional protection is required, the case part can be printed and secured with adhesive tape.