Soil Pipe Clamp
Babel_SoilPipeClamp110mm
SUMMARY
Clamp designed for repair of damaged pipe of connection of pipe sections. Suitable for 110mm outside diameter soil pipe. This part can be customised to any required size.
Download Size 3.5 MB
PRINT SETTINGS
QUALIFICATION
Material:
Print time:
Resolution:
PETG
5h 6m
0.15 mm
Tested by 3D Crowd
TESTING METHOD
Nozzle size:
Rafts:
Supports:
Infill:
Print Size:
0.4 mm
No
No
15%
170 x 60 x 55
Print suitability tested only.
TESTING NOTES
Material used:
40 g
Printer test:
Prusa Mini
PRINT NOTES
ADDITIONAL COMMENTS
PETG required for all but lowest force applications, where PLA may be substituted. Infill density may be varied depending on pipe pressure. Some stringing may be encountered on the finished part, this can be scraped off with a flat blade.
What files or other parts do I need to print this?
Babel_SoilPipeClamp110mm.stl (2 parts required) ; Babel_SoilPipeClamp110mm_0.15mm_PETG_PRUSAMINI_5h6m.gcode ; M12 metric bolts with nuts and washers
Assembly instructions
2 identical parts required to clamp pipe. Fixed with M12 or ½ inch bolts and nuts with washers.
Original Credit:
This Version:
Chris Pepler - 3D Crowd - 04 December 2020
Licence:
Creative Commons (4.0 International License)
Attribution-NonCommercial